An appropriate and well-functioning SD card is essential for successful camera trapping. Here we will detail how to choose a card, keep it in good working order, and troubleshoot if you experience an issue.
When choosing an SD card for your trail camera you should take into consideration both your personal requirements and the compatibility of the card with the camera itself.
At NatureSpy we offer a free SD card with all trail cameras (other than Ltl Acorn) so you can be confident your card is compatible with your new camera!
Storage Capacity
First and foremost, you must ensure the card capacity you pick is appropriate for your model of camera. Different brands and models have varying maximum capacities from 16GB to 512GB. Therefore it is worth checking the manufacturer’s user manual or the specifications on our product pages for clarification.
For most people, a 16GB or 32GB SD card is almost certainly sufficient – especially when your camera is primarily used for watching garden wildlife. However, if you are wanting to leave your camera somewhere remote, where it cannot be checked for a month or so, you should consider a 64GB card. For even longer periods, a 128GB card might be more suitable
Speed Class
The read and write speeds of SD cards can quickly become very complicated. To keep it simple, we would advise using cards that include either (or both) of the symbols circled below:
These symbols both tell you that the minimum write speed of the card is 10MB/s – which is very suitable for use with a trail camera. Different ratings occasionally cause issues as can be too fast/slow to work correctly with your camera (see more on U3-rated cards below).
A note on microSD cards…
We do not recommend using a microSD card within an adapter in any trail camera. At NatureSpy we have seen problems caused by these on multiple occasions. A standard, full-sized SD card is the best choice.
In order to keep your SD card functioning as it should, we suggest formatting regularly. Formatting an SD card essentially ‘resets’ it and erases every file stored on it. It also acts as a sort of ‘handshake’ between the card and camera, ensuring files are stored correctly in a suitable format.
The video below shows how to format a card step-by-step on a Browning camera. The method will be similar for other manufacturers but may be listed under a different name within the settings. For example, Bushnell cameras simply say ‘Format’, rather than the ‘Delete All’ on a Browning.
We suggest formatting your card in your camera regularly, particularly on its first use, or if it has been used in any other device previously. Formatting in the trail camera itself is always preferable to formatting on a computer, which can change the memory file system itself and occasionally cause issues.
SD card issues can cause a trail camera to start acting strangely or appear to stop functioning at all. If you experience any of the following, the SD card might be to blame:
In these circumstances, you can try several quick things to attempt to resolve the problem yourself.
If any issues continue after you have tried the above, please take a look at our quick troubleshooting article or contact us at [email protected]. Someone from our technical support team will then get in touch to help you resolve the problem.
The content of this article is copyright of NatureSpy. All rights reserved.
You may print and/or download its contents for your own personal, non-commercial use only.
Re-sale, commercial exploitation, third-party use and any redistribution or reproduction of part or all its contents in any form is prohibited without express written permission.
Nor may you transmit or store any of its contents in any other website or other form of electronic retrieval system.